4.9
Changing the settings
You need the ATMOS Capture Suite software to use these functions. Follow the
operating instructions for the ATMOS Capture Suite software.
4.9.1
Disabling functions
You can disable the following functions:
Auto Strobo function
Haptic Feedback
Image 180° rotation
Tap function
LED status indicator
Automatic toggle
5 MP photo
Auto Detect Endoscope
Auto Standby/Wake-up
Display of the stroboscope parameters and
the corresponding camera settings while
stroboscoping
Vibration of the camera
Rotation of the image by 180° if the camera
head is rotated by 180°
Response when tapping camera head
Status indicator
Automatic changeover of video source
Saves photo in highest possible resolution
Automatic endoscope detection
Automatic transition to standby mode
15
Operation