Procedure - Atmos iQam Operating Instructions Manual

5.3.3

Procedure

Pretreatment at the site
of use
Pre-clean
Dismantle
Manual cleaning and
disinfection
Checking and maintain-
ing
Assembly
Function check
Packaging
Sterilizing
20 Reprocessing
Not necessary
Not necessary
Not necessary
1. Clean the device evenly with a suitable cloth
and a suitable detergent under running
water.
2. Immerse the device in the cleaning solution
(follow manufacturer's instructions) and clean
it in the solution evenly with a suitable cloth.
3. Disinfect the device evenly with a suitable
cloth and a suitable disinfectant. Observe
instructions regarding contact time.
1. Check wether reprocessing was successful
with a suitable light magnifier.
2. If reprocessing was unsuccessful, the proce-
dure must be repeated.
Not necessary
Other: coupler shoe function
Not necessary
Not necessary