Preparing The Device; Installing The Software - Atmos iQam Operating Instructions Manual

3.3

Preparing the device

Risk of injury and risk of infection due to production residues.
1. Prior to first use, prepare the product according to the operating instruc-
tions.
2. Connect the camera cable to the camera head. Make sure that the red dots
on the ATMOS connector plug and camera head are facing each other.
3. Perform a function check after connecting.
Connecting to a PC
1. Connect the camera cable (USB connector) to a PC.
Connecting to an ENT treatment unit (ATMOS S 61 Servant vision or ATMOS
S 61 CORIAN® integral)
1. Connect the camera cable (ATMOS connector plug) to the corresponding
connection on the respective ENT treatment unit.
CORIAN® is a registered trademark of E. I. du Pont de Nemours and Company or
its affiliated companies.
3.4

Installing the software

Observe the operating instructions for the ATMOS Capture Suite software.
Setting up and starting up
11