Mivoice Office 250 V6.2 Sp1 New Features; System Diagnostic Improvements; Watchdog Improvement; T1/E1 Refresh - Mitel MiVoice Office 250 Administration Manual

MiVoice Office 250 v6.2 SP1 New Features

This section briefly describes the new features, hardware, and enhancements available on the
MiVoice Office 250 when equipped with the v6.2 SP1 software release.

System Diagnostic Improvements

This feature supports "extended CP logging" to help diagnose customer-affecting issues, and
new "archive options" for preserving various logs and statistics from the system. They are
available in SysAdmin and in the Admin Web Portal (AWP).
Note: The Extended CP Logging capability is only to be used for specific debugging
activity. It is not recommended to enable these logs without prior consultation with Mitel
Product Support. Alarm A150 'Extended CP Logging is Enabled' will appear until all
Extended CP Logging options are disabled again.

Watchdog Improvement

The watchdog monitors activity of call processing. If call processing does not respond to the
watchdog every 30 seconds, it will restart the MiVoice Office 250 system. New Logs are in the
cp_watchdog_observer_log.txt file available in SysAdmin and Admin Web Portal (AWP).

T1/E1 Refresh

The FPGA component on the Dual T1/E1 card had to be replaced. The new card version is
backward compatible to previous releases. Release 6.2 SP1 now also contains the firmware
upgrade mechanism.
7