Mitel MiVoice Office 250 Administration Manual page 58

MiVoice Office 250 Unified Voice Messaging Administration Guide
Table 3: Voice Prompts: Non-ASR and ASR (continued)
Prompt
ID
107 To record an introduction with a copy of this
message, press one.
108 To change your personal greeting, press one.
109 To change your name in the directory, press two.
110 To change your passcode, press three.
111 To change your message envelope, press four.
112 To replay the message, press one.
113 To select your primary greeting, press one.
114 To select your alternate greeting, press two.
115 To select the system greeting, press three.
116 After the tone, please record your greeting, then
press pound (hash).
117 Greeting saved.
118 After the tone, please record your name, then press
pound (hash).
119 Name saved.
120 Your message envelope is currently set to return... N/A
121 ...all information.
122 ...time and date...
123 ...message source...
124* ...and...
125 ...message length...
126 To turn on all envelope options, press four.
127 For message source, press two.
128 For message length, press three.
129 This option is now off.
130 This option is now on.
50
Content (Non-ASR) Content (ASR)
To record an introduction with a copy of this
message, say "Record" or press one.
To change your personal greeting, say
"Greeting" or press one.
To change your name in the directory, say
"Name" or press two.
To change your passcode, say "Passcode" or
press three.
To change your message envelope, say
"Envelope" or press four.
To replay the message, say "Replay" or press
one.
To select your primary greeting, say "Primary"
or press one.
To select your alternate greeting, say
"Alternate" or press two.
To select the system greeting, say "System"
or press three.
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
To turn on all envelope options, say "All
Options" or press four.
For message source, say "Source" or press
two.
For message length, say "Length" or press
three.
N/A
N/A
Page 6 of 32