EZ-ACCESS PATHWAY HD Code Compliant Modular Access System Installation Manual page 87
Hide thumbs
Also See for PATHWAY HD Code Compliant Modular Access System:
- Installation supplement manual (29 pages)
Table of Contents
Advertisement
FIG. 7.13
PATHWAY HD Code Compliant Modular Access System Installation Manual
7.3.4.6.
Attach the platform extender to the main platform using platform tie
straps, platform connectors, or a combination of one of each.
Regardless of the combination used, the platform extender must
be connected to the main platform in two locations.
7.3.4.7.
If using platform tie straps, hold platform extender as close as possible
to the main platform, and then center platform tie strap between the
platform side rails approximately 1" to 2" from platform corner pocket.
7.3.4.8.
Attach using the four 1/4" x 1" long self-drilling, self-tapping pan head
Phillips screws provided (FIG. 7.13).
Page 87 of 92
Advertisement
Table of Contents
Need help?
Do you have a question about the PATHWAY HD Code Compliant Modular Access System and is the answer not in the manual?