EZ-ACCESS PATHWAY HD Code Compliant Modular Access System Installation Manual page 32
Hide thumbs
Also See for PATHWAY HD Code Compliant Modular Access System:
- Installation supplement manual (29 pages)
Table of Contents
Advertisement
4.6.4. For platform picketed guards, pre-assemble the top rail by inserting 5/16"-18 x 1" long
4.6.5. Pre-assemble the platform picketed guard by inserting a 5/16"-18 x 1" long hex bolt
PATHWAY HD Code Compliant Modular Access System Installation Manual
hex bolts through a 5/16" flat washers, the uppermost hole in the platform angle
posts, and into the 5/16"-18 round threaded inserts in the top rail.
through a 5/16" flat washer (use flat washer for the upper rail only; do not use a
washer on the lowermost holes), the platform angle post, and into the 5/16"-18
square threaded inserts in the picketed guard (FIG. 4.10).
FIG. 4.10
Page 32 of 92
Advertisement
Table of Contents
Need help?
Do you have a question about the PATHWAY HD Code Compliant Modular Access System and is the answer not in the manual?