EZ-ACCESS PATHWAY HD Code Compliant Modular Access System Installation Manual page 51

Hide thumbs Also See for PATHWAY HD Code Compliant Modular Access System:

Table of Contents

5.6.12. Insert 1-1/2" square threaded inserts into both ends of the 1-1/2" x 2" mid rail

5.6.13. Attach the mid rail attachment plates to mid rail with 5/16"-18 x 1" long flat head

FIG. 5.23

FIG. 5.24

PATHWAY HD Code Compliant Modular Access System Installation Manual

(FIG. 5.23). Use a rubber mallet or similar tool to fully seat as needed.

socket cap screws (the hole in the mid rail attachment plate is offset to account

for the offset of the threaded insert in the mid rail). Orient the plate such that the

mid rail is centered on both sides, and then tighten screws securely (FIG. 5.24).

Page 51 of 92

Table of Contents

Need help?

Do you have a question about the PATHWAY HD Code Compliant Modular Access System and is the answer not in the manual?