Picketed Guard Closure - EZ-ACCESS PATHWAY HD Code Compliant Modular Access System Installation Manual

Hide thumbs Also See for PATHWAY HD Code Compliant Modular Access System:

Table of Contents

5.4. PICKETED GUARD CLOSURE

5.4.1. Picketed guard closures are specific to the platform size (5', 6', or 7') and require the

5.4.2. Attach the picketed guard closure to the platform angle post.

FIG. 5.13

PATHWAY HD Code Compliant Modular Access System Installation Manual

ramp to be mounted to one side or the other of a platform. If the ramp is to be

placed anywhere other than the side of a platform, custom components will be

needed (consult your sales representative for the required components).

5.4.2.1. Upper Rail: Use 5/16"-18 x 1" long hex bolts and 5/16" flat washers to

attach the upper rail.

5.4.2.2. Lower Rail: Use 5/16"-18 x 1" long hex bolt; do not use a flat washer at

this location (FIG. 5.13).

Picketed guard closures are symmetric so can be installed with either rail on

top. What becomes the "upper" or "lower" rail depends on how the closure is

positioned at installation.

Page 42 of 92

Table of Contents

Do you have a question about the PATHWAY HD Code Compliant Modular Access System and is the answer not in the manual?