EZ-ACCESS PATHWAY HD Code Compliant Modular Access System Installation Manual page 47

5.5.3. Locate a handrail bracket. Hold handrail bracket in place, centered on the platform
5.5.4. Use the hole in the handrail bracket as a template to drill a 5/16" or 11/32" hole
5.5.5. Attach the handrail bracket to the platform angle post using a 5/16"-18 x 1" button
5.5.6. Attach handrail bracket to the tube bend with a 1/4" x 1-1/2" self-drilling, self-tapping
5.5.7. If needed, trim the open end of the tube bend.
5.5.8. Insert a 1-1/2" end plug into the open end of the tube bend (FIGs. 5.18 and 5.19).
5.5.9. Tighten all fasteners securely.
FIG. 5.19
PATHWAY HD Code Compliant Modular Access System Installation Manual
angle post with the saddle in contact with the tube bend (FIG. 5.18).
through the platform angle post.
head socket cap screw, 5/16" flat washers, and 5/16"-18 nylon insert locknut
oriented as shown (FIG. 5.18).
pan head Phillips screw through the hole in handrail bracket saddle (FIG. 5.18).
Use a rubber mallet or similar tool to fully seat as needed.
FIG. 5.18
Page 47 of 92