EZ-ACCESS PATHWAY HD Code Compliant Modular Access System Installation Manual page 37

5.2.5. Attach the barrier attachment plate to the barrier using a 5/16"-18 x 1" long hex bolt
5.2.6. Move the ramp or platform slightly (if needed) and clamp the attachment plate to the
5.2.7. Use the two smaller holes in the barrier attachment plate to drill two 1/4" or 9/32"
5.2.8. Connect the barrier attachment plate to the ramp side rail using 1/4"-20 x 3/4" long
5.2.9. Tighten all fasteners securely.
FIG. 5.4
FIG. 5.5
PATHWAY HD Code Compliant Modular Access System Installation Manual
and 5/16" flat washer. Make sure the leg of the attachment plate with the two smaller
holes is captured under the upper hook and in contact with the ramp side rail.
side rail before drilling (FIG. 5.4).
holes through the ramp side rail (FIG. 5.5).
ribbed neck carriage bolts, 1/4"-20 nylon insert locknuts, and 1/4" flat washers. Orient
the head of the carriage bolt on the ramp side as shown (FIG. 5.5).
Page 37 of 92