EZ-ACCESS PATHWAY HD Code Compliant Modular Access System Installation Manual page 41

5.3.5. Loosen the elbow assembly screws and align the round faces of the adjustable
5.3.6. Measure the gap between the faces of the opposing rings of the 2-15/16" ring joiners
5.3.7. Cut the 1-1/2" diameter round tube to the length measured.
5.3.8. Using a metal file, remove any sharp edges from cutting.
5.3.9. Install the cut 1-1/2" diameter round tube between the 2-15/16" ring joiners.
5.3.10. To facilitate installation, remove and reinstall the adjustable elbow with threaded
5.3.11. Tighten the adjustable elbow assembly screws and all 2-15/16" ring joiner set screws
FIG. 5.11
FIG. 5.12
PATHWAY HD Code Compliant Modular Access System Installation Manual
elbows, and then tighten the elbow assembly screws and joiner set screws enough to
hold them in position (FIG. 5.11).
(FIG. 5.11).
insert from the platform angle post (FIG. 5.12).
securely.
Page 41 of 92