Warnings - oventrop mote 200 Operating Instructions Manual

Safety-related information
2.4

Warnings

Each warning contains the following elements:
Warning symbol SIGNAL WORD
Type and source of danger!
Possible consequences if the danger occurs
or the warning is ignored.
f Ways to avoid the danger.
The signal words identify the severity of the danger
arising from a situation.
WARNING
Indicates a possible danger with moderate
risk. The situation may lead to death or seri-
ous injury if not avoided.
NOTICE
Indicates a situation that may lead to damage
to property if not avoided.
2.5 Safety notes
We developed this product in accordance with the
current safety requirements.
Please note the following information concerning
safe use.
2.5.1 Risk of injury caused by batteries
Gaseous or liquid substances may escape as a result
of mechanical damage to batteries. These may be
severely irritating or toxic.
An electrical fault, such as a short-circuit, may result
in overheating.
External warming up, for instance caused by ex-
posure to direct sunlight or attempts to charge the
batteries, may lead to an explosion.
f Ensure that "mote 200" is sufficiently protected from
mechanical and thermal influences.
f Do not use the product any longer if it shows visible
signs of damage.
f Ensure that the batteries are inserted with the cor-
rect polarity (+/-).
f Do not expose the batteries to direct sunlight or
naked flames.
f Do not use partially discharged batteries together
with new ones.
f Do not try to charge the batteries.
f If any battery fluid leaks and comes into contact with
skin, eyes or mucous membranes, rinse the affected
areas immediately with plenty of clean water and
seek medical attention.
6
2.5.2 Suffocation risk for children
Keep the "mote 200" and its packaging out of reach
of children to avoid risk of ingestion and suffocation.
f Keep the "mote 200" out of reach of children.
f Seek medical attention immediately if small parts
have been swallowed.
2.5.3 Availability of the operating instructions
These operating instructions must be read and ap-
plied by any person working on the product.
The operating instructions must be available at the
installation location.
„mote 200"
115096180#EN-V04.01.2020