Working Online (Pbx Database) - Aastra Ascotel IntelliGate 150 System Manual

Ascotel® IntelliGate® 150/300 as of I7.9
5. 5. 2

Working online (PBX database)

Data in the PBX database can only be accessed in the online mode. The following
functions are available:
Connect
The PBX is connected with the AIMS Shell and automatically loads the data of the
PBX into the PC's main memory.
Disconnect
Closes all the AIMS Managers and disconnects the online connection between the
PC and the PBX.
If data has been changed, but not yet stored in the PBX by saving, the system dis-
plays a prompt asking whether the configuration should be saved.
The system will then ask you whether you want to update the local AIMS database.
Save
The modified data is stored in the PBX and the check marks alongside the modified
parameters are cleared. Saving always stores the data from all the AIMS Managers
in the PBX.
Download
During a download via the AIMS Shell the PBX data are loaded from the PBX to the
AIMS database.
During the download the PBX is automatically prebarred and then automatically
released once the operation is completed. Existing connections are retained. The
progress of the download operation is indicated by a progress indicator bar in a
window. A download can be carried out when the system is operating under full-
load conditions.
Download view
The View Download function loads the PBX data of the current window in an AIMS
Manager from the PBX into the PC's main memory. This partial download is availa-
ble in the online mode of individual Managers (e.g. Configuration Manager, Fault &
Maintenance Manager). "View Download " is used to register new or modified hard-
ware in AIMS.
Configuration 149