Configuring The Fax Server - Aastra 470 Installation Manual

Configuring the fax server

Configuring the fax server
The server-based fax service integrated on the application card converts
incoming messages into PDF files and sends them to the recipient as e-mail
attachement. When outgoing PDF files in e-mail attachements are converted
into fax messages. This section deals only with the configuration of the fax
server. To configure the entire fax service, you need additional configuration
steps.
Routing of incoming fax messages
DDI numbers for receiving external fax messages are monitored directly by the fax
server and are not linked with a call distribution element. The fax server converts
fax messages of the type Group 3 fax into an e-mail with attachment and sends it
to the destination user. Use of the fax service is subject to fax licences.
Fax server settings
Parameter
IP address and port (display
only)
Domain
E-mail address for error
messages
16
Explanation
The fax service IP address is identical to the applications card IP address. The
permanently assigned port is port 9060.
The standard domain name is fax.local. Please do not modify this if possible,
after installing the fax client application on the PCs. However, if necessary, you
must adapt the registry as follows on each PC:
Start the fax client setup, with the following parameter request, whereby you
must replace fax.local with the new domain name:
Client-Setup32.exe
/v"REG_ADDREXTFAXPREFIX=\"[SMTP:\"
REG_ADDREXTFAXPOSTFIX=\"@fax.local]\""
Check the registry input. This should be as follows, with the new domain name
in place of fax.local:
HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Ferra
ri\fomclient\Outlook\Addin]
"AddrExtFaxPostfix"="@fax.local"
Enter here the e-mail address to which the fax server should send error
messages.
Aastra-Fax-
Applications Card CPU2
syd-0421/1.2 – R2.1 – 07.2012