Setting Functions By Remote Control - Aastra 5370 User Manual

Supplementary features

Setting functions by remote control

This section explains how you can alter your phone's settings even if you are not
directly at your phone.
You are not at your desk and want to set various functions on your phone from a dif-
ferent phone.
You can activate/deactivate many of your phone's functions by remote control from a
different phone.
The remote control is initiated using a special function code. You can then enter the
function commands and function codes.
<Function code>
78
Using remote control from a third-party phone:
1. Enter function code #06.
2. Enter your phone number.
3. Enter your PIN.
4. Enter the function code for activating/deactivating the function you want.
Pick up the handset.
➔
You hear the acknowledgement tone.
Put the handset on-hook.
➔
The function is activated/deactivated.
Note:
The default PIN setting "0000" is not accepted. First change the PIN as
described in chapter "Changing the
(see "User's Guide Function Codes" on the
ten your PIN, your system administrator can reset it to the default setting.
PIN", page 92 or use the function code *47
Aastra DocFinder). If you have forgot-
Aastra 5370/Aastra 5370ip
eud-1281/1.3 – R3.0 – 04.2013