Remote-Controlled Functions; Remote-Controlled Dialling (Call Through) - Aastra OpenCom 100 Quick Reference Manual

Remote-Controlled Functions

The OpenCom 100 / Aastra 800 enables remote-controlled calls and remotely pro-
grammable call forwarding. These features are set up by the system administrator
when he configures the system. To carry out these features the system PIN is required.
The system PIN is issued by the system administrator, who has to change the default
value "0000" to another value before it is issued.
In addition, all the owners of voiceboxes can, with the corresponding authorisation,
call their voiceboxes from external telephones. They can remotely access and edit
their messages as well as modify the central settings of their voiceboxes.

Remote-Controlled Dialling (Call Through)

Without internal number assignment
Z
(reserved call no.)
Wait until the connection to the communications system has been established. You
hear a positive acknowledgement tone.
Z *
(system PIN) (external access code, e.g.
Z (external call no.)
With internal number assignment
Z
(reserved call no.)
Wait until the connection to the communications system has been established. You
hear a positive acknowledgement tone.
Z *
(system PIN) (external access code, e.g.
Z
(external call no.)
You can call the OpenCom 100 / Aastra 800 from outside (from home, for example),
then dial an external number and continue telephoning with the cost being charged
to the OpenCom 100 / Aastra 800 connection. This way you take advantage of dif-
ferent tariff zones, for example.
The system administrator must have set up a number (for remote control) in the
OpenCom 100 / Aastra 800 for this feature. In addition, the number reserved in the
OpenCom 100 / Aastra 800 can also be assigned an internal call number, via which the
dialling is to be performed. In the case of remote-controlled dialling, there is no check
on authorisation.
#
* Z
(internal call no.)
0
)
0
)
#
37