Initialising The Unit And Setting Log Levels - Panasonic CZ-256ESMC3 Operating Instructions Manual

Initialising the unit and setting log levels

Initialise the unit and set an identification number (password) and log output levels.
All data is deleted when you initialise.
Unless you are the administrator, do not initialise under any circumstances.
1
Touch [IntelContrlr maint] in "Settings".
The "IntelContrlr maint" screen is displayed.
z
2
Touch [Initialize].
Enter the identification number (password level 2) and the
z
"Initialize" screen is displayed.
1
2
Initialising
1
Select the type of initialisation.
Item
@FctryShip
ResetCumlDataFrToday
2
Touch [Initialize].
Several confirmation messages will be displayed, so touch
z
[Yes] each time.
Initialisation starts.
z
When initialising is complete, the message "Settings were
z
reset. IntelligntCtrlr is restarting..." is displayed.
202
1
Explanation
All data (settings, accumulated data,
distribution data) is deleted.
The accumulated data for the day is
deleted. Use this after performing a test
operation of the air conditioning units, for
example.
2