Panasonic CZ-256ESMC3 Operating Instructions Manual page 163

6
Setting the input conditions.
The items you can set depend on the input target selected.
z
6
 When air conditioning unit alarm batch is selected
Item
MltAlrms Select either "ON" or "OFF".
y "ON" indicates that an error alarm has been
transmitted.
y "OFF" indicates that a unit has recovered from an
error.
 When a digital input/output device is selected
DigitalInput Select either "ON" or "OFF".
y "ON" is displayed when digital input signals are on.
y "OFF" is displayed when digital input signals are off.
 When an indoor unit has been selected
I/DUnt* Ope. Select either "ON" or "OFF".
y "ON" is displayed when operation of the
y "OFF" is displayed when operation of the
Alarm Select either "ON" or "OFF".
y "ON" indicates that an error alarm has
y "OFF" indicates that a unit has recovered
Room T Set the room temperature. The touchscreen
numeric keypad appears when you touch
the text box.
Select either "min." or "max.".
y "min." indicates when the temperature is
y "max." indicates when the temperature is
* Set one of the condition items on the right.
Explanation
indoor units has been started.
indoor units is stopped.
been transmitted.
from an error.
above the set temperature.
below the set temperature.
Linked control of air conditioning units
7
Touch [Register].
The "Input point settings" dialogue closes.
z
To cancel the settings, touch [Cancel].
z
8
Select the output point border (8-1) and
touch [Set] (8-2).
The "Output point settings" dialogue is displayed.
z
9
Select the output target from the list.
Output targets include digital input/output devices, indoor
z
units (all at once, individual, and control groups).
9
163
7
8-
1
8-
2
Continued on next page