Panasonic CZ-256ESMC3 Operating Instructions Manual page 70

(2) Select the items to be displayed (4-2).
You can select multiple items.
z
Refer to "RglrHourRnge" in "Calendr sttgs for distr calc"
z
(P.148) for information about "RglrHours1" to "RglrHours8".
4-
2
(3) Touch .
The settings are registered and the "Display data" dialogue
z
closes.
The "Pulse acc." screen
A: Set the values to be displayed. Touch to
select either "Adaptor value" or "Total value".
y If you set "Adaptor value", the displayed
value changes at 10-second intervals.
B: Set the periods to be displayed. The
"Calendar" dialogue is displayed when you
touch this.
y When "Total value" is set, totals matching
the time slot set in "Time" ("RglrHours",
"OutOfHours", etc.) are displayed.
C: The accumulated values for pulse meters
are displayed in a list.
You can scroll up or down by swiping or
flicking the screen.
Item
Name
Dstr
Type
Adaptor value (when "Adaptor value" is
selected)
Meter value (when "Adaptor value" is
selected)
Time (when "Total value" is selected)
D: The "Display data" dialogue is displayed when you touch this, and you can select the items to add to the display.
y If you set the "Adaptor value", you cannot select the items to be displayed.
E: You can output (save) the displayed list of pulse accumulation in CSV format. (→ "Outputting (saving) the displayed contents as a
CSV file" (P.32))
Checking the list of accumulated values on a pulse meter
5
A
C
The names of all units (indoor units and outdoor units) are displayed.
The distribution group number is displayed.
The type of meter is displayed.
The accumulated value of the communication adaptor is displayed.
The accumulated value for pulse meter is displayed.
The accumulated pulse count values for the adaptor or specified period are displayed. ("All hours",
"OutOfHours", "SpecifdDay")
Display items ("RglrHours1" to "RglrHours8") can also be added.
70
Check accumulated values.
B
Explanation
E D