Panasonic CZ-256ESMC3 Operating Instructions Manual page 103

Item
O/D unit cyclic The O/D unit cyclic function is enabled for the
Valid selected outdoor unit if you put a check mark
here.
5
Touch [Register].
The "Setting" dialogue closes.
z
To cancel the settings, touch [Cancel].
z
6
Set other outdoor units.
Repeat steps 3 to 5.
z
7
Touch [Timer set.].
The "Term setting" dialogue is displayed.
z
7
8
Touch the number.
You can set 4 different time slots.
z
8
Control operation at regular intervals [O/D unit cyclic]
Explanation
5
103
9
Set the times.
The time on the left is the control start time. The time on
z
the right is the control end time.
Use to set the time. Hours can be set in the
z
range 0 to 23, and minutes may be either "00" or "30".
9
10
Touch [Register].
The "Term setting" dialogue closes.
z
To cancel the settings, touch [Cancel].
z
11
Put a check mark in the "Valid" column.
11
10
Continued on next page