Configuring The System - Panasonic CZ-256ESMC3 Operating Instructions Manual

Configuring the system

This chapter describes how to make settings required to run the system.
The main settings are as follows:
y Group settings (schedule, area, distribution)
y Pulse meter settings, distribution mode settings, distribution ratio settings
y Email settings
Screen menu
Calendr sttngs for distr calc
I/D unit settings
Schedule group name settings
Area group name settings
Pulse meter settings
Distribution mode settings
Distribution Ratio settings
Event control
Email settings
O/D unit settings
Distribution group settings
Communication adapter setting
Overview
Set specified days, cut-off days, particular time slots (regular hour ranges) and days of
the week for calculating distributions.
Change the settings on the indoor units.
Edit the name of the schedule group.
Edit the name of the area group.
Make allocations between pulse meters and distribution groups.
Set the mode used for distributing when calculating charges.
Set the units for calculating electricity and gas usage charges.
Set the conditions for input points and output points to perform linked control.
Configure the outgoing mail server.
Change the settings on the outdoor units.
Edit the name of the distribution group.
Register the communication adaptor connected to this unit.
140
Page
148
141
151
153
158
160
161
162
168
145
155
170