Setting delay times
Make settings to delay control when the power or gas demand level either rises or falls.
The delay group setting content for each time slot corresponding to outdoor units is shown in graphs.
(Invalid: Grey / Group 1: Blue / Group 2: Red / Group 3: Green / Group 4: Light blue / Group 5: Yellow)
1
Touch [System Settings] in "Settings".
The "System settings" screen is displayed.
z
1
2
Touch [Hybrid GHP/EHP settings].
Enter the identification number (password level 1 or 2) and
z
the "Hybrid GHP/EHP settings" screen is displayed.
3
Touch [Delay time settings].
The "Delay time settings" screen is displayed.
z
[Delay time settings]
4
Put a check mark in the "Select" column.
Select the outdoor units you want to edit.
z
4
5
Touch [Set].
The operation dialogue is displayed.
z
2
3
188
5
Continued on next page