Panasonic CZ-256ESMC3 Operating Instructions Manual page 78

Item
Return temperature Set the return temperatures for "Heat",
Return time "Cool", and "Auto" and the return time.
Use
or time.
The setting ranges are as follows.
y Return temperature for heating:
y Return temperature for cooling (dry):
y Return temperature for auto:
y Return time (shared):
Auto return The auto return function is enabled for
the selected indoor unit if you put a check
mark here.
The following items are settings common to all indoor units.
y Eco dirc. only Select the conditions for return.
y Always return When you select "Eco dirc. only", the
return to the set temperature only occurs
automatically if it saves energy.
y Allow auto C/H When you select "Allow auto C/H",
y Fan switching temperature auto return control also
occurs in the automatic mode.
When you select "Fan switching", when
the running mode of the indoor units is
switched to "Auto Cool/Heat" the mode
switches from automatic mode to fan
mode, irrespective of the return time.
5
Touch [Register].
The "Setting" dialogue closes.
z
To cancel the settings, touch [Cancel].
z
Automatically return to set temperatures [Set temp. auto return]
Explanation
to set the temperature
16 to 30 °C* (1 °C intervals)
1
*1 The upper limit temperature for
some models is 26 °C.
18 to 30 °C (1 °C intervals)
17 to 27 °C (1 °C intervals)
0 to 240 minutes (5 minute intervals)
5
6
Set other indoor units.
Repeat steps 3 to 5.
z
7
Touch [Reg.].
To cancel the settings, touch [Cancel].
z
78
7