Checking The List Of Accumulated Values On A Pulse Meter - Panasonic CZ-256ESMC3 Operating Instructions Manual

Checking the list of accumulated values on
a pulse meter
The accumulated pulse count values for the pulse meter are displayed in a list. (When a pulse meter is set)
1
Touch [Accumulate/Distrib] in "Oper./
Status".
2
Touch [Pulse acc.].
The "Pulse acc." screen is displayed.
z
3
Set the period to be displayed.
Set the start and end of the period to be displayed.
z
The time at the left is the start of the period and the time at
z
the right is the end.
If you set the "Adaptor value", you cannot select the period
z
to be displayed.
1
2
4
69
(1) Touch (3-1).
The "Calendar" dialogue is displayed showing the current
z
date.
(2) Touch the date (3-2).
Use to select the month you want to check. The
z
current month is displayed if you touch [ThsMth].
The settings are registered and the "Calendar" dialogue
z
closes.
Select the display item.
(1) Touch [Display data] (4-1).
The "Display data" dialogue is displayed.
z
3-
1
3-
2
4-
1
Continued on next page