Panasonic CZ-256ESMC3 Operating Instructions Manual page 96

Suppressing the consumption of electricity/gas [Demand/peak shaving settings]/[Peak cut settings]
Item
Start time Set the start and end times for "Timer 1" and
End time "Timer 2".
Use
The setting ranges are as follows.
y Hours: 00 to 23 (1 hour intervals)
y Minutes: 00 to 59 (1 minute intervals)
Note
y You can make the settings extend over
different dates.
Demand Select an operation.
No operation is caused if you select [----].
When you have selected [Ope.] in "Demand",
set the control rate with
values shown are those values that can be
set for the outdoor unit selected.
Demand/peak The outdoor unit time slot demand control
shaving Valid setting is enabled for the selected outdoor
unit if you put a check mark here.
5
Touch [Register].
The "Setting" dialogue closes.
z
To cancel the settings, touch [Cancel].
z
Note
y The settings for peak cut (when using gas heat pump air conditioners) are made in the same way as outdoor time slot demand settings.
Explanation
to set the time.
For example: 22:00 to 08:00
. The
5
6
Set other outdoor units.
Repeat steps 3 to 5.
z
7
Touch [Register].
To cancel the settings, touch [Cancel].
z
96
7