Setting The Date And Time - Panasonic CZ-256ESMC3 Operating Instructions Manual

Setting the date and time

Manually set the date and time. This setting is not necessary of you are using the NTP server (P.123).
1
Touch [IntelContrlr maint] in "Settings".
The "IntelContrlr maint" screen is displayed.
z
2
Touch [Date settings].
Enter the identification number (password level 1 or 2) and
z
the "Date setting" screen is displayed.
Note
y Do not turn back the time manually by 30 minutes or more.
Errors may occur in the basic settings on the indoor unit, and distribution results may be affected.
1
2
3

Setting the date and time.

Item
Day Set the date.
Month Use
Year
Hours* Set the time.
Minutes Use
Seconds "Seconds".
* The time system for "Hours" is 24 hours.
4
Touch [Register].
To cancel the settings, touch [Cancel].
z
204
Explanation
to set "Day", "Month", and "Year".
to set "Hours", "Minutes", and
4