Panasonic CZ-256ESMC3 Operating Instructions Manual page 144

4
Touch [Register].
To cancel the settings, touch [Cancel].
z
5
Touch [Register].
To cancel the settings, touch [Cancel].
z
Note
y Do not register indoor units in the same area to multiple distribution
groups.
y Do not allocate PAC and GHP to the same area or distribution
groups when using time distribution.
Automatically setting central addresses
1
4
2
5
144
Basic settings on the indoor unit
Put a check mark in the "Register"
column.
Select the indoor units you want to manage.
z
1
Touch [CNTR adr AutSet].
2
Note
y The central address is shared with other centralised
controllers (system controllers, etc.). Do not change unless
necessary.
y After setting the central address in the "Edit unit settings"
dialogue, and then enable [CNTR adr AutSet], the central
addresses will be overwritten.