Panasonic CZ-256ESMC3 Operating Instructions Manual page 171

7
Repeat steps 3 to 6 to edit other
communication adaptors.
8
Put a check mark in the "Register"
column.
Put a check mark next to the communication adaptors you
z
want to enable.
8
The "Communication adapter setting" screen
A: A list of communication adaptors with a check
mark in the "Register" column is displayed when
you touch this. Touch again to return to the
previous display.
B: Put a check mark next to the communication
adaptor you want to edit.
C: Put a check mark next to the communication
adaptors you want to enable.
D: The "Edit CommAdptrStgs" dialogue is displayed
when you touch this.
Note
y In the "Address" column, "Link1" and "Link2" are
in this unit, and addresses such as "1-Link1"
and "1-Link2" are the addresses of added
communication adaptors.
Registering a communication adaptor
9
Touch [Register].
To cancel the settings, touch [Cancel].
z
B C
171
9
A
D