Panasonic CZ-256ESMC3 Operating Instructions Manual page 19

Settings
Settings
(Perform other miscellaneous settings)
Submenu Screen menu
Calendr sttngs for distr calc

 I/D unit settings
 O/D unit settings
Schedule group name settings

Area group name settings

Distribution group settings

 Pulse meter settings
Distribution mode settings

Distribution Ratio settings

Event control

 Network settings
 Email settings
 Web user settings
 Communication adapter setting
 Check configuration*
Hybrid GHP/EHP settings

Backup

Restore

CSV Output

CSV Input

Auto-save CSV file

Display/Volume settings*

Intelligent Controller info

Software update*

 Initialize*
 Language&TimeZone sttngs
Date settings

Open license
 Test run
 A/C communication settings
Maintenance information

Menus marked with  require you to enter the identification number (password) when you select them.

 menus require entry of the level 1 or higher identification number, while
Refer to "Input of the identification number (password)" (P.22) for details.
Overview
Set specified days, cut-off days, particular time slots (regular hour ranges) and days of
the week for calculating distributions.
Change settings on indoor units, such as indoor unit addresses, groups belonged to, etc.
Change settings on outdoor units (addresses, etc.).
Edit the name of the schedule group.
Edit the name of the area group.
Edit the name of the distribution group.
Make allocations between pulse meters and distribution groups.
Set the mode used for distributing when calculating charges.
Set the units for calculating electricity and gas usage charges.
Perform linked control by setting input and output conditions for devices.
Make settings to enable remote control over a network.
Configure the outgoing mail server.
Register users that will access the unit over a network.
Register the communication adaptor connected to this unit.
Modify the registered configuration when there have been changes to the configuration
of the system.
Make settings for Hybrid GHP/EHP control.
Save data (settings, accumulation/distribution, logs) to USB memory devices.
Restore data that has been stored in the unit or saved to a USB memory device.
Export (output) the settings for this unit in CSV format.
Import (input) the settings for this unit in CSV format.
Saves the CSV files (distributions, logs) automatically generated in this unit.
Adjust the brightness of the unit's screen and the sound of the buzzer.
Register the contacts for servicing (telephone numbers) for this unit.
Update the software for this unit.
Initialise the settings for this unit.
All data will be lost when you initialise.
Do not initialise under any circumstances.
Set the language to be used when setting and operating this unit.
Manually set the date and time.
The licences for the freeware is displayed.
Perform a test operation of the indoor unit after installing this unit.
Make settings such as the communications protocol between this unit and the air
conditioning units.
Register the units that will require maintenance.
* These settings are not available for setting or operation over the network.
requires the level 2 identification number.

19
Menu list
Page
148
141
145
151
153
155
158
160
161
162
123
168
125
170
226
172
130
132
134
136
138
199
200
201
202
205
204
—
207
210
212