Basic Settings For The Pulse Meter - Panasonic CZ-256ESMC3 Operating Instructions Manual

Basic settings for the pulse meter

Make allocations between pulse meters and distribution groups.
1
Touch [System Settings] in "Settings".
The "System settings" screen is displayed.
z
1
2
Touch [Pulse meter settings].
Enter the identification number (password level 2) and the
z
"Pulse meter settings" screen is displayed.
3
Put a check mark in the "Select" column.
Select the pulse meter to be edited.
z
3
2
4
Touch [Setng].
The "Edit pulse meter sttgs" dialogue is displayed.
z
5
Change the settings.
Item
Name Change the pulse meter name.
You can enter up to 16 letters or numbers.
UnitName Enter the units to be displayed for the pulse meter.
MultFctr
Use
be displayed for the pulse meter.
After decimal
Use
pt
places to be displayed for the pulse meter. (0 to 3)
Display
Use
in a list.
Type
Use
Select from "Elec", "Gas", "PwGn", "TpWt", and
"Ice".
158
4
Explanation
to set the multiplying factor to
to set the number of decimal
to set the order when displayed
to set the pulse meter type.
Continued on next page