Table of Contents
Advertisement
5
Touch [Register].
The "Setting" dialogue closes.
z
To cancel the settings, touch [Cancel].
z
6
Set other indoor units.
Repeat steps 3 to 5.
z
The "Set temp. range limit" screen
A:
[Select all]/[Clear all] buttons
[Select all]
Select all indoor units.
[Clear all]
Cancel selection of all
indoor units.
B:
Change list order. The list order changes
each time you touch it.
Display
The display follows the order set
in "I/D unit settings" (P.141).
O/D unit
The display follows the outdoor
unit display order set in "O/D unit
settings" (P.145).
Address
The display follows the address
order set in "I/D unit settings"
(P.141).
C:
The indoor units with a check mark next to
them will be the subject of the changes to the
settings.
D:
The temperature range limit setting is enabled
for the selected indoor unit if you put a check
mark here. This is linked with the "Temp
range limit" ("Setting" dialogue) (P.83) setting.
E:
The "Setting" dialogue is displayed when you touch this.
Restricting the range of set temperatures [Set temperature range limit]
7
5
A
C
84
Touch [Register].
To cancel the settings, touch [Cancel].
z
D
E
7
B
- Quick Links:
- Troubleshooting
Hide quick links:
Advertisement
Table of Contents
