Autocheck Assistant - Husqvarna Automower Technical Manual

4. Autocheck, Service program
2. Turn ON the main switch on the mower.
3. Start Autocheck.
If Autocheck does not make contact with the connected
mower, this may be due to the computer being
equipped with more than one serial port and the correct
port has not been selected in the program, see 4.4.2
Communication on page 63.
When a connected Automower stands for a while
without any programming, registering or the like being
made, the mower enters sleep mode. The display is
completely dimmed. The mower is then activated by
switching the main switch off and on. Contact between
the mower and program is then regained by pressing
F5 on the keyboard or by clicking on any Autocheck
menu.
Autocheck is shutdown by clicking on the Exit button in
the lower left corner of the window or by clicking on the
cross in the upper right corner of the window.
IMPORTANT INFORMATION
Remember to refit the protective cover on the
service outlet on the mower once work has
been completed.

4.3 Autocheck Assistant

Autocheck Assistant is a utility that checks and
manages important functions in Autocheck.
The Autocheck Assistant opens automatically when
Autocheck starts. Autocheck Assistant checks that
Automower has the correct version of the mower
program, that the serial number is correct and that the
right version of Autocheck is used. It also gives a
reminder to save the mower in the log file and to carry
out an Auto test.
If the Status is green the mower is approved.
Whereas if the Status is red something on the mower
needs to be rectified. All functions that are not
approved are highlighted in red with a reference to
rectify the problem.
Click on the arrow in the left-hand corner to activate
or deactivate Autocheck Assistant.
62 Automower from ™
3012-742