Autocheck Service Tool; Installation And Login; Connect The Product; How To Use Autocheck 3 - Husqvarna GARDENA SILENO city Workshop Manual

Autocheck 3 is a PC tool developed for the service of
the robotic lawn mowers from Husqvarna Group. It is a
tool for troubleshooting as well as a database of sold
products and service history. Autocheck also includes
technical documentation and service bulletins.
Autocheck 3 supports all G3 (Generation 3) and G4
(Generation 4) products. Autocheck EXP is still
applicable for G2 (Generation 2).
The product is connected to the computer using a USB
service cable.

5.1 Installation and login

Autocheck 3 supports Windows OS 7 and later.
Compatibility with other operating systems cannot be
guaranteed.
5.1.1 Getting log in credentials
The log-in credentials determine the set of capabilities
available within Autocheck 3.
To get Autocheck log-in credentials, either contact your
local sales support, or order Autocheck through the
Dealer Portal (requires access).
Note: Distributors can request access to Autocheck
through the Husqvarna IT service portal. Access to
Husqvarna IT service portal can be ordered through the
Husqvarna sales representative.
5.1.2 Installing Autocheck 3
Autocheck 3 is available for downloading from the
manufacturer's support site.
AFTER SALES – Service tools – Autocheck 3
1. Select
– SW installation .
2. Download Autocheck 3 according to the instructions
on the Support site.
3. Run the installation file.
When the installation is complete, an Autocheck 3
shortcut is created on the desktop.
Contact your regional Husqvarna Group contact person
if you lack access to the Support site.
5.1.3 Log in to Autocheck 3
1. Double-click on the Autocheck icon.
2. Enter your username and password, refer to
log in credentials on page 13 .
3. Choose country and select
Note: At the first log-in after installation, Autocheck
requires access to internet for user and password
validation.
1067 - 001 - 16.04.2019

5 Autocheck service tool

Getting
OK .

5.2 Connect the product

1. Remove the battery cover. Refer to
battery on page 24 .
2. Connect the service cable between your computer
and the product:
3. Start Autocheck on your computer.
4. Switch on the product with the ON/OFF button.
5. After finishing the work in Autocheck, disconnect the
cable.
6. Refit and fasten the battery cover. Refer to
replace the battery on page 24 .
Contact between Autocheck and the product is usually
established automatically and confirmed through the
product's unique identification number.
Connected mower: None is displayed in
If the text
Autocheck, contact with the product has not been
established:
• Check that the cable is correctly connected both in
the computer and in the product.
• Check that the ON/OFF button is switched on.

5.3 How to use Autocheck 3

The program's main functions are grouped in a number
of menus.
Home
•
To replace the
To
Autocheck service tool - 13