Husqvarna Auto Mower Operator's Manual

Husqvarna Auto Mower Operator's Manual

Auto mower
Hide thumbs Also See for Auto Mower:

Advertisement

Auto Mower

Operator's Manual
Please read through this Operator's Manual
carefully and understand its contents before
using the Auto Mower.
101 91 46-26

Advertisement

Table of Contents
loading

Summary of Contents for Husqvarna Auto Mower

  • Page 1: Auto Mower

    Auto Mower Operator's Manual Please read through this Operator's Manual carefully and understand its contents before using the Auto Mower. 101 91 46-26...
  • Page 2 The Auto Mower is in many ways a revolutionary product. It allows you to have a well-kept lawn throughout the season with a minimum of inspection and maintenance.
  • Page 3: Table Of Contents

    There are rotating blades under the Auto Loop wires ................4 Mower. Never put your hands or feet close Auto Mower ................. 4 to or under the body of the Auto Mower Installation while it is running. Planning the installation ............5 Installation of the charging station ........
  • Page 4: Safety Regulations

    • Do not put anything on top of the Auto Mower or its charging station. • Do not allow the Auto Mower to be used if any part is seen to be defective or faulty. This includes the cutting disc, blades, Care nuts, bolts and cables.
  • Page 5: Parts Of The Auto Mower

    PARTS OF THE AUTO MOWER STOP STOP What is what? 13. Keypad 1. Handle and cover rest 2. Box containing computer, battery and wheel motors 14. Power switch 15. Charging station 3. Cutting disc 16. Loop wires 4. Protective disc 17.
  • Page 6: Function

    After this it returns to the random principle. Initially the Auto Mower works for a few hours to get an idea of the average length and thickness of the grass. Only then does it start working systematically.
  • Page 7: Installation

    It may be necessary to cut the grass using a traditional lawn mower before using the Auto Mower for the first time. The Auto Mower will then prevent the grass from growing long.
  • Page 8: Installation Of The Charging Station

    The Auto Mower must then be moved by hand between the various working areas, since automatic battery charging can only be carried out while the Auto Mower is in the main area. To facilitate the manual work see the chapter, “Settings” (Mowing secondary areas).
  • Page 9: Installation Of Boundary Wire

    Where a path has been laid at the same level as the lawn, it is possible to allow the Auto Mower to drive a little way on to the path and cut the grass right up to the edge. In this case, lay the boundary wire about 10 cm from the edge of the path.
  • Page 10: Installation Of Search Wire

    Auto Mower must therefore find the search wire. If the Metallic objects can interfere with the boundary signal. The Auto Mower has plenty of charge left in its battery, it will ignore the boundary wire should therefore not be routed too close to iron search wire.
  • Page 11 If so, it is important that the wires are equally spaced. Since the Auto Mower follows the path of the search wire, it must be laid at least 40 cm away from any obstacle to prevent the Auto Mower from bumping into anything on its way to the charging station.
  • Page 12: Installation, Step By Step

    Wait to connect the cable ends. installation instructions are performed. If the Auto Mower is in the charging station – fold up the Use the tool supplied to cover, enter the first digit of the code and move the mower connect the six wires to the from the charging station.
  • Page 13: Use

    Operator’s Manual before you start the Auto Mower. • Turn the Auto Mower upside down and place it on a soft surface. • Unscrew and loosen the height adjustment knobs to adjust Starting the Auto Mower the cutting height.
  • Page 14: Charging An Empty Battery

    These instructions apply when Auto Mower is new, or after a long period of storage. If the Auto Mower has been used recently it does not need to be started in the charging station, see the chapter “Start and stop”.
  • Page 15: Settings

    Selecting a personal code “down-trodden”. In addition, component wear increases You have to enter a code into your Auto Mower for it to start and the battery life may be shortened. working. On delivery the code is set to 0000 #.
  • Page 16 34 # before the battery is discharged. By moving the Auto Mower back to the working area where the When the wire sensor at the front of the Auto Mower is outside charging station is located it will seek out the charging station the boundary wire the mower beeps, and when it is inside it is itself when necessary.
  • Page 17: Lamp And Sound Indications

    Sound and lamp indications This table shows the Auto Mower’s sound and lamp signal indications. When the mower cover is opened and the alarm has been switched off, the LEDs on the keypad panel will light for 12 seconds. A green LED indicates an information message and a red LED an error message.
  • Page 18: Replacing The Blades

    • During the winter the Auto Mower should be stored in a dry place, preferably in its original packaging or parked on all four Remove corrosion from the Auto Mower charging pins and wheels with the power switch set to “STOP”.
  • Page 19: Trouble Shooting

    Trouble shooting chart Refer to “Sound and lamp indications” for explanations of the Auto Mower indications. Before trouble shooting, first charge the Auto Mower battery in the charging station to eliminate faults due to low battery charge. Read through the entire Operator’s Manual to make sure that the fault cannot be easily solved by using the keypad commands or the power switch.
  • Page 20 Uneven mowing result The Auto Mower is working too few Lengthen the working time, see “Settings”. hours each day. The working area is too large. Try reducing the size of the working area or lengthening the working time, see “Settings”.
  • Page 21 We, Husqvarna AB, S-561 82 Huskvarna, Sweden, tel +46 36-146500, declare under sole responsibility that the automatic lawn mower Husqvarna Auto Mower from 1998’s serial numbers and onwards (the year is clearly stated in plain text on the type plate with subsequent serial number), is in conformity with the following standards or other normative documents following the provisions in the COUNCIL’S DIRECTIVES:...
  • Page 22 ´*3.^¶6M¨...
  • Page 23 English –...
  • Page 24 ´*3.^¶6M¨ 2000W49...

Table of Contents