Husqvarna Automower Technical Manual page 85

Settings: Clock/Timer
Here you can read and, if you want, change the times
set on the connected mower. You can change the date
and time, as well as change the timer settings.
To change the date and time:
1. Make sure the correct time and date are set on
your computer. If not; change them from the
Control Panel.
2. Click on PC-time to mower.
The Set time button allows you to send another time
than the computer's time to the mower. You should
then enter the required data and then click Set time.
To change Timer settings:
1. Enter the required start and stop times or click on
Reset.
2. Click on Present or the appropriate Program
button in the Change program box to save the
settings in the mower.
4. Autocheck, Service program
Automower from
3012-577
85
™