Husqvarna Automower Technical Manual page 64

4. Autocheck, Service program
4.4.5 Autocheck Assistant
In the Autocheck Assistant function you choose
whether you want the function activated and whether
you want Autocheck Assistant to be displayed as
soon as a new mower is connected.
You also choose how often you want Autocheck
Assistantto check for updates of Autocheck, the
mower program and documentation. Automatic
checks for updates require access to an internet
connection. The check is made when Autocheck
starts. If no updates are available Autocheck
Assistant shows green. Whereas if there are updates
available Autocheck Assistant shows red and you are
invited to download the updates or new
documentation.
3012-743
4.4.6 Miscellaneous
In the Miscellaneous function you choose whether
Autocheck should display extended information while
you perform an Auto test. The extended information
provides a good guide through the test and is
particularly useful for inexperienced users.
In order for Autocheck to be used there must be
contact between the connected mower and Autocheck.
Autocheck checks the contact with the mower
continuously. As soon as Autocheck loses contact with
the connected mower the message No contact is
displayed. If an old PC is used, this function can slow
down your PC. By unchecking the Enable checkbox
Autocheck will no longer notify when it has lost contact
with the mower; this will only become apparent when
you try to program or make other registrations.
4.4.7 Dealer data
In the Dealer data function those of you who are
dealers enter your contact details. The details are then
included on all printouts from Autocheck.
64 Automower from ™