Autocheck Service Tool; Installation And Login; To Connect The Product; How To Use Autocheck 3 - Husqvarna Automower 305 Workshop Manual

Autocheck 3 is a PC tool developed for the service of
the robotic lawn mowers from Husqvarna Group. It is a
tool for troubleshooting as well as a database of sold
products and service history. Autocheck also includes
technical documentation and service bulletins.
Autocheck 3 supports all G3 (Generation 3) and G4
(Generation 4) products. Autocheck EXP is still
applicable for G2 (Generation 2).
The product is connected to the computer using a USB
service cable.

5.1 Installation and login

Autocheck 3 supports Windows OS 7 and later.
Compatibility with other operating systems cannot be
guaranteed.
5.1.1 Getting log in credentials
The log-in credentials determine the set of capabilities
available within Autocheck 3.
To get Autocheck log-in credentials, either contact your
local sales support, or order Autocheck through the
Dealer Portal (requires access).
Note: Distributors can request access to Autocheck
through the Husqvarna IT service portal. Access to
Husqvarna IT service portal can be ordered through the
Husqvarna sales representative.
5.1.2 Installing Autocheck 3
Autocheck 3 is available for downloading from the
manufacturer's support site.
AFTER SALES – Autocheck 3 – SW
1. Select
installation .
2. Download Autocheck 3 according to the instructions
on the Support site.
3. Run the installation file.
When the installation is complete, an Autocheck 3
shortcut is created on the desktop.
Contact your regional Husqvarna Group contact person
if you lack access to the Support site.
5.1.3 Log in to Autocheck 3
1. Double-click on the Autocheck icon.
2. Enter your username and password, refer to
log in credentials on page 14 .
3. Choose country and select
Note: At the first log-in after installation, Autocheck
requires access to internet for user and password
validation.

14 - Autocheck service tool

5 Autocheck service tool
Getting
OK .

5.2 To connect the product

1. Remove the service plug.
2. Connect the service cable between your computer
and the product.
3. Start Autocheck on your computer.
4. Switch on the product with the ON/OFF button.
5. When the work in Autocheck is complete, disconnect
the cable.
6. Install the service plug and make sure it seals
correctly.
The connection between Autocheck and the product is
usually set up automatically. The product is identified
through the product's identification number.
Connected mower: None is shown in
If the text
Autocheck, there is no connection with the product:
• Check that the cable is correctly connected in the
computer and in the product.
• Make sure that the product is switched on.

5.3 How to use Autocheck 3

The program's main functions are grouped in a number
of menus.
Home
•
Auto test
•
Manual test
•
1414 - 001 -