Autocheck Experience, Service Program; Installation And Login - Husqvarna Automower 320 Technical Manual

4. AUTOCHECK EXPERIENCE, SERVICE PROGRAM

4 Autocheck Experience,
Service program
The Autocheck EXP service program is a tool to use
in connection with service of robotic lawnmowers from
the Husqvarna Group. Its uses include:
• Updating software in the robotic lawnmower
• Troubleshooting the robotic lawnmower
• Reading information from the robotic
lawnmower
• Setting the robotic lawnmower
• Reading documents applicable to the robotic
lawnmower
Autocheck EXP is intended for robotic lawnmowers
from and including the 2003 model. The program does
not work on earlier models.
The robotic lawnmower is connected to the computer
using a service cable. There are 2 different cables:
• USB cable with service connector of a
standard USB type for Husqvarna G3 models
(e.g. Automower
• USB cable with a special type of service
connector for Husqvarna Automower
G2 models (e.g. 220AC, 230 ACX, Solar
Hybrid and 265 ACX).

4.1 Installation and login

Autocheck EXP can only be installed on PC computers.
The program has been developed and tested
for the following operating systems: Windows XP,
Windows Vista (32 and 64 bits), Windows 7 (32 and
64 bits) and Windows 8 (32 and 64 bits). Compatibility
with other operating systems cannot be guaranteed.
The program uses a screen resolution of 1024 x 768.
When using screens with lower resolution full
functionality is not guaranteed.
4.1.1 Installing Autocheck EXP
1. Exit all open programs on your computer.
2. Insert the DVD with the service program into
the computer's reader.
The installation program normally starts
automatically. If not, go to My Computer and
open it manually.
3. Follow the instructions given on screen.
English - 42
320 and 330X).
®
®