Husqvarna Automower Technical Manual page 79

To copy data to the new control box:
Before replacing the control box:
1. Ensure that the mower is connected correctly and
that the main switch is turned ON.
2. Click on Save data.
This button then becomes dimmed and a new
box, Save data, is displayed. The connected
mower's serial number and the current date are
stated as the filename in the Save data as box.
You can change the filename by selecting the
name, delete it and then enter a new name.
3. Click on Save.
4. Click OK when the message Settings saved is
displayed.
When a file has been saved, the function of the box
Save data changes to Transmit data.
The Transmit data function can also be accessed by
clicking on the Transmit data button in the Copy all
data to new control box.
After replacing the control box:
5. Ensure that the mower is connected correctly and
that the main switch is turned ON.
6. Select the file you wish to transmit from the list in
the Transmit data from box.
If you would like to keep the file after it has been
transmitted to the mower you will need to
deselect the Delete file after transmission
checkbox.
7. Click on Transmit.
8. Click OK when the message Settings changed is
displayed.
Operating history: Search times
Search times indicates partly an average value of
how long each search for the charging station has
taken, partly a maximum value that indicates how
long the longest search took.
The last 20 search times are shown in the list.
4. Autocheck, Service program
Automower from
3012-571
3012-572
3012-573
79
™