Husqvarna Automower Technical Manual page 72

4. Autocheck, Service program
Manual test: User interface
1. Press and hold down all buttons on the keypad,
one at a time, on the connected mower.
The button you are pressing is shown in the Latest
pressed button box.
2. Click on Test display to check the pixels. Clicking
once lights all the pixels on the display. The button
then changes to Reset display. Click on the
button to switch off the pixels again.
3. Close the control panel cover on the mower to
check the function of the stop button.
When the cover is closed, RUNNING POSITION
should then be displayed in the Stop button box.
When the cover is opened, STOP POSITION
should then be displayed in the box.
4. Turn the main switch ON and OFF to check the
function of the switch.
ON is displayed in the Main switch box when the
main switch is ON. OFF is displayed in the box
when the main switch is OFF.
5. Click on Test alarm to test the mower's speaker.
The alarm is heard for a few seconds when the
speaker is working and it then switches off
automatically.
72 Automower from ™
3012-565