Kohler EKOZD Series Service page 52

I/O
Menu
D Resistive Input
Analog Input 0:1
Analog Input 0:2
Analog Input 0:3
Analog Input 0:4
Analog Input 0:5
Analog Input 0:6
DESCRIPTION: (function by default
d
unless modified via SiteTech)
MEASUREMENT: ###.#Ohms
d
EVENT: *
d
INPUT ENABLED: ON/OFF*
d
SENSOR TYPE: *
d
LOW PROTECTIVE INHIBIT: ##s*
d
LOW WARNING: ON/OFF*
d
LOW WARNING LIMIT: *
d
LOW WARNING DELAY: ##s*
d
LOW SHUTDOWN: ON/OFF*
d
LOW SHUTDOWN LIMIT: *
d
LOW SHUTDOWN DELAY: ##s*
d
HIGH PROTECTIVE INHIBIT: ##s*
d
HIGH WARNING: ON/OFF*
d
HIGH WARNING LIMIT: *
d
HIGH WARNING DELAY: ##s*
d
HIGH SHUTDOWN: ON/OFF*
d
HIGH SHUTDOWN LIMIT: *
d
HIGH SHUTDOWN DELAY: ##s*
d
* User-Defined (changeable) Menu Displays. Use SiteTecht software to change other settings including User-Defined Menu Displays.
52 Section 2 Operation
I/O
Menu (Continued)
D Digital Input
Digital Input 0:1
Digital Input 0:2
Digital Input 0:3
Digital Input 0:4
Digital Input 0:5
Digital Input 0:6
DESCRIPTION: (function by default
d
unless modified via SiteTech)
STATUS: ACTIVE/INACTIVE
d
FUNCTION: *
d
EVENT: *
d
LOGIC: ACTIVE ON/ACTIVE OFF *
d
ENABLED: ON/OFF*
d
INHIBIT TIME: ##s*
d
DELAY TIME: ##s*
d
D Digital Output
Digital Output 0:1
Digital Output 0:2
Digital Output 0:3
Digital Output 0:4
Digital Output 1:1
(Note: Only displayed if the 15-Relay
Dry Contact Kit is installed.)
...
DESCRIPTION: (function by default
d
unless modified via SiteTech)
STATUS: ACTIVE/INACTIVE
d
FUNCTION: *
d
EVENT: *
d
LOGIC: ACTIVE ON/ACTIVE OFF*
d
Active Events
Menu
Rotate the dial to view Active Events:
Warnings
Shutdowns
Statuses
Notices
Press the OFF button to return to the
main menu.
TP-6953 7/19