Kohler EKOZD Series Service page 146

8.3 Request and Status Messages
Request and Status Messages
Display messages require the user to enter additional
data, confirm the previous entry or require time to
process as described below.
Entry Accepted appears for several seconds after
pressing the Enter key during the programming mode.
The display then shows the new data.
Reset Complete indicates the user has successfully:
Reset the maintenance records,
D
Restored the AC analog inputs to the default settings,
D
or
Restored voltage regulator settings to the defaults.
D
Right Arrow  directs the user to the next menu. The
menus loop; press the right arrow key to move to the
next menu.
146 Section 8 Decision-Makerr 3500 Controller
8.4 Factory Reserved Inputs
Available user inputs
factory-reserved inputs for specific engine types, engine
controls, and paralleling applications. See Figure 8-2
and Figure 8-3 for analog and digital inputs that are not
user-selectable.
8.5 Controller Functional Test
The controller operation includes several types of
starting and stopping functions as detailed in the
operation manual. The controller master control switch
buttons, lamps, and alarm horn functions are
summarized in Figure 2-3.
are dependent on
TP-6953 7/19