Front Bench Seat With Lengthwise Seat - Capron T58 Manual

7
Living
7.10.3
78

Front bench seat with lengthwise seat


Do not stand on the bedding box extension when it is pulled out. The
bedding box extension may be damaged thereby.
Fig. 88 Prior to conversion
Fig. 90 After conversion

Model T: Insert additional floor plate on the step to the driver's area to
obtain an even seating area.

Remove the back cushion and the seat cushion of the lengthwise seat
and lay them aside.

Convert the lift-off table as a bed foundation (see section 7.6.2).

Fold the seat base of the lengthwise seat upwards.

Lift the bedding box extension on the lengthwise seat slightly.

Pull out the bedding box extension on the lengthwise seat as far as it will
go.

Fold the seat base of the lengthwise seat down.

Unfold the seat base of the lengthwise seat.

Place the seat cushion of the lengthwise seat on the bedding box exten-
sion.

Place the back cushion of the lengthwise seat between the seat cushion
and the exterior wall.

Lay the seat cushion of the front bench seat on the table top.

Lay the additional cushion onto the bedding box extension.
Fig. 89 During conversion
Capron - 3141417 - 03/20 - EHG-0021-02EN