Isofix Child Safety Seat Mounting System - Capron T58 Manual

5
During the journey
36
5.6

ISOFIX child safety seat mounting system

 Make sure that the child restraint system and the ISOFIX car seat fit-
ting system have been approved for the vehicles from Capron accord-
ing to the manufacturer's specifications.
 Do not use any child restraint systems with support leg.
 Only use ISOFIX car seat fitting systems with top tether.
 Do not attach any other child restraint systems or belts, nor other ob-
jects to the ISOFIX retaining clips.
 If the distance between the child restraint system and the table is too
small, there is the risk of the child's legs being caught. Therefore,
when using a child restraint system: lower the table to the bed set-up
position (lift-off table), or push it completely to the front in the direction
of the driver's seat (table with rigid table leg), or remove the table
(suspension table).
 Observe the safety instructions and fitting instructions of the child re-
straint system manufacturer.

In the case of the vehicles with a L-seating group (I/T68 and 69L), the
cushion on the side wall must be removed if the ISOFIX child safety seat
mounting system is used.

Child restraint systems of the installation type "Universal" are generally
approved for vehicle seats with three-point safety belt.
Fig. 11 Seat with ISOFIX
ISOFIX-suitable vehicle seats are provided with the ISOFIX symbol
(Fig. 11,2). The position of the top tether is marked with a symbol
(Fig. 11,3), too.

Let the connectors (Fig. 12,8) snap into the retaining clips (Fig. 11,4).
While doing this, a distinctive click must be heard.

With a strong jerk, check if the child seat (Fig. 12,7) is firmly connected.

Let the headrest snap into the lowest catch.

Route top tether strap (Fig. 12,5) over the headrest of the vehicle seat.

Hook fixing hook (Fig. 12,6) in at the top tether (Fig. 11,1).
The removal is carried out analogously in inverted order.

Also observe the instruction manual of the child restraint system manu-
facturer.
Fig. 12 Fixing with ISOFIX
Capron - 3141417 - 03/20 - EHG-0021-02EN