Front Bench Seat With Divan - Capron T58 Manual

7.10.2
Capron - 3141417 - 03/20 - EHG-0021-02EN

Front bench seat with divan


Do not stand on the bedding box extension when it is pulled out. The
bedding box extension may be damaged thereby.
Fig. 85 Prior to conversion
Fig. 87 After conversion

Depending on the model, insert an additional floor plate at the step to
the driver's area to obtain an even seating area.

Remove the back cushion and the seat cushion of the divan and lay
them aside.

Convert the suspension table into a bed foundation (see section 7.6.1).

Fold the seat base of the divan upwards.

Pull up the bedding box extension on the divan.

Pull out the bedding box extension on the divan all the way.

Fold down the seat base of the divan.

Unfold the seat base of the divan.

Place the seat cushion of the divan on the bedding box extension of the
divan.

Place the back cushion of the divan between the seat cushion and the
exterior wall.

Lay the seat cushion of the front bench seat on the table top.

Place two short additional cushions in front of the seat cushion.

Lay the long additional cushion onto the bedding box extension.
Living
Fig. 86 During conversion
7
77