Lift-Off Table - Capron T58 Manual

Conversion to bed
foundation:
7.6.2
Shifting table top lengthwise
and crosswise:
Lowering table top to bed
foundation:
Moving table top to original
position:
Capron - 3141417 - 03/20 - EHG-0021-02EN
Fig. 59 Bed foundation
The table's fold-out leg enables it to be used as a bed foundation.

Slightly raise the front of the table top (Fig. 59,1).

Press the release knob (Fig. 59,2) and fold the lower part of the fold-out
leg (Fig. 59,3) by 90°.

Swivel the table top approx. 45° upward and remove the table from the
retainer.

Insert the table into the lower retainer and rest it on the table leg hinge.

Lift-off table

The table top can be moved in both a crossways and a lengthways direction.
With the special equipment "Bed set-up", the table top can additionally low-
ered to the bed foundation. The table does however not have a continuous
height adjustment. Only two positions are possible (lowered and not low-
ered).
Fig. 60 Lift-off table

Fold the lever of the central table lock (Fig. 60,1) downwards.

Push the table top to the desired position.

Fold the lever of the central table lock upwards.

Pull the table top slightly upwards.

Push the table top downwards as far as it will go.

Pull the table top upwards as far as it will go.

Press table top down around 20 mm.
7
Living
65