Fixed Bed (Gas-Pressure Springs); Lying Surface Of Rear Single Beds - Capron T58 Manual

7
Living
Safety net
Setting up:
7.9.4
Opening:
Closing:
7.9.5
74
The safety net (Fig. 77,1) is stored as standard between the mattress and
slatted frame. Do not use the safety net until the person is already in bed.

Fasten the retaining straps (Fig. 77,2) to the holders on the ceiling.

Fixed bed (gas-pressure springs)


Lower the slatted frame before setting off.

Do not put the weight of heavy objects onto the bed during the journey.
Fig. 78 Fixed bed
A storage space is underneath the bed. Lift up the slatted frame to place
items in the storage space or to empty it from the inside of the vehicle.

Lift the mattress forwards.

Lift slatted frame. The gas-pressure springs (Fig. 78,1) hold the slatted
frame open.

Press the slatted frame downwards against the resistance of the gas-
pressure springs.

Lying surface of rear single beds

Depending on the equipment, the single beds in the rear may be trans-
formed into a continuous lying surface.

Pull the width extension out of the console between the beds.

Insert the supplied additional cushion.
Capron - 3141417 - 03/20 - EHG-0021-02EN