Emptying The Sewage Tank - Capron T58 Manual

11
Sanitary fittings
11.6.3
134

Emptying the sewage tank


The sewage tank can only be taken out if the sliding trap is closed.
Fig. 144 Flap for the sewage tank

Slide the slide lever on the toilet bowl in a clockwise direction. The slid-
ing trap is closed.

Open the flap for the sewage tank on the outside of the vehicle. Insert
the key into the locking cylinder (Fig. 144,1) of the push-button lock and
turn a quarter turn in a clockwise direction.

Remove the key.

Press both push-button locks (Fig. 144,2) simultaneously with your
thumb and open the flap for the sewage tank.

Swivel flap fully upwards and carefully set on the exterior wall. The flap
is kept open magnetically.

Pull the retaining clip (Fig. 145,2) upwards and pull out the sewage tank
(Fig. 145,1).

Completely empty the sewage tank at disposal stations that are espe-
cially provided for this purpose.

Actuate the aeration knob on the sewage tank with your thumb to empty
it completely.
Fig. 145 Sewage tank
Capron - 3141417 - 03/20 - EHG-0021-02EN