Winter Care; Preparations - Capron T58 Manual

Changing the active carbon
filter:
12.5
12.5.1
Capron - 3141417 - 03/20 - EHG-0021-02EN
Fig. 148 Change the active carbon fil-
ter

Open the housing as described in "Cleaning the grease filter".

Release the filter holder (Fig. 147,1) out of the lock at the front and
swivel it downwards.

Remove the active carbon filter (Fig. 148,1) of the holder in upward di-
rection.

Insert a new active carbon filter.

Swivel the filter holder (Fig. 148,2) upwards until it engages.

Close the housing as described in "Cleaning the grease filter".

Further information can be obtained in the instruction manual for the re-
spective appliance.

Winter care

De-icing salt damages the underbody and the parts open to water spray. We
recommend that you wash the vehicle more frequently during wintertime.
Mechanical and surface treated parts and the underside are under particular
strain, and should therefore be cleaned thoroughly.

If there is any risk of frost, always run heater at a minimum of 15 °C.
Switch the circulation fan (if there is one) to automatic. In the case of ex-
treme external temperatures, the furniture flaps and doors should be left
slightly open. The inflowing warm air can help prevent the freezing of
water pipes, for example, and counteract the formation of condensation
in the storage spaces.

If there is any risk of frost, cover the outside surface of the windows with
winter insulation mats.

Preparations


Check the vehicle for paint and rust damage. Repair damage as neces-
sary.

Make certain that water cannot penetrate the automatic floor ventilation
system and the heater.

Use a wax-based rust inhibitor to protect the metal parts of the under-
body.

Use appropriate protection for external painted surfaces.
12
Care
143